Regenerate v7.1.2: fix CATEGORY_MAP comma symmetry for Welcome-to-INAV quickstart

Author: sensei-hacker

versioned_docs/version-7.1.2/advanced/Supported-boards.md

@@ -15,7 +15,7 @@ These boards are well tested with INAV and are known to be of good quality and r
 | [Matek F405-WING](https://inavflight.com/shop/s/bg/1292190)       | F4         | MATEKF405SE                | All  | All     | All            | All       | All                            | SERIAL, SD     |
 | [Matek F722-SE](https://inavflight.com/shop/p/MATEKF722SE)       | F7         | MATEKF722SE               | All  | All     | All            | All       | All                            | SERIAL, SD     |
 
-It's possible to find more supported and tested boards [here](./Welcome-to-INAV-useful-links-and-products.md)
+It's possible to find more supported and tested boards [here](../quickstart/Welcome-to-INAV-useful-links-and-products.md)
 ### Boards documentation
 
 See the [docs](https://github.com/iNavFlight/inav/tree/master/docs) folder for additional information regards to many targets in INAV, to example help in finding pinout and features. _Feel free to help improve the docs._

versioned_docs/version-7.1.2/advanced/launch-mode.md

@@ -11,7 +11,7 @@ title: Launch Mode
  - [Fixed-Wing Guide](../quickstart/Fixed-Wing-Guide.md)
  - [YouTube video guides](../quickstart/YouTube-video-guides.md)
  - [Setting up Failsafe for RTH](../features/Failsafe.md)
- - [Tested & Suggested Hardware](./Welcome-to-INAV-useful-links-and-products.md)
+ - [Tested & Suggested Hardware](../quickstart/Welcome-to-INAV-useful-links-and-products.md)
  - [Arming is disabled / WPs don't execute](https://github.com/iNavFlight/inav/wiki/%22Something%22-is-disabled----Reasons)
  - [Sensor auto detection and Hardware Failure detection](../features/Sensor-auto-detect-and-hardware-failure-detection.md)
  - [Sensor calibration](../quickstart/Sensor-calibration.md)
@@ -48,4 +48,4 @@ title: Launch Mode
 
 ## Vintage area
 
- - [Howto: CC3D flight controller, minimOSD, GPS and LTM telemetry for fixed wing](./Howto:-CC3D-flight-controller-minimOSD-GPS-and-LTM-telemetry-for-fixed-wing.md)
+ - [Howto: CC3D flight controller, minimOSD, GPS and LTM telemetry for fixed wing](../quickstart/Howto:-CC3D-flight-controller-minimOSD-GPS-and-LTM-telemetry-for-fixed-wing.md)

…-GPS-and-LTM-telemetry-for-fixed-wing.md …-GPS-and-LTM-telemetry-for-fixed-wing.mdversioned_docs/version-7.1.2/advanced/Howto:-CC3D-flight-controller-minimOSD-GPS-and-LTM-telemetry-for-fixed-wing.md renamed to versioned_docs/version-7.1.2/quickstart/Howto:-CC3D-flight-controller-minimOSD-GPS-and-LTM-telemetry-for-fixed-wing.md versioned_docs/version-7.1.2/advanced/Howto:-CC3D-flight-controller-minimOSD-GPS-and-LTM-telemetry-for-fixed-wing.md renamed to versioned_docs/version-7.1.2/quickstart/Howto:-CC3D-flight-controller-minimOSD-GPS-and-LTM-telemetry-for-fixed-wing.md

@@ -73,7 +73,7 @@ It is done using Ports tab ![Ports tab](http://s8.hostingkartinok.com/uploads/im
 On the Configuration tab in the Mixer group select the Airplane or Flying Wing depending on the airframe you are using.
 ![Airplane](http://s8.hostingkartinok.com/uploads/images/2017/02/cbcafe5219dcc85798b0cf2e2a86fcde.png)
 Do not pay attention on the servo numbering! It will be described later.
-Now you need to make the accelerometer calibration. It is mandatory to fulfill it and it is better to do it before installing the FC into airframe. Please follow the [instructions](../quickstart/Calibration-Tab.md) to perform the 6 point accelerometer calibration.
+Now you need to make the accelerometer calibration. It is mandatory to fulfill it and it is better to do it before installing the FC into airframe. Please follow the [instructions](./Calibration-Tab.md) to perform the 6 point accelerometer calibration.
 Do not activate "enable motor and servo otput" until you are sure the kind of airplane has been selected correctly. Otherwise, servos can receive high frecuencies (as for ESCs) and burn.
 
 ### Flight controller orientation.

…mOSD-telemetry-and-GPS-for-fixed-wing.md …mOSD-telemetry-and-GPS-for-fixed-wing.mdversioned_docs/version-7.1.2/advanced/Howto:-CC3D-flight-controller-minimOSD-telemetry-and-GPS-for-fixed-wing.md renamed to versioned_docs/version-7.1.2/quickstart/Howto:-CC3D-flight-controller-minimOSD-telemetry-and-GPS-for-fixed-wing.md versioned_docs/version-7.1.2/advanced/Howto:-CC3D-flight-controller-minimOSD-telemetry-and-GPS-for-fixed-wing.md renamed to versioned_docs/version-7.1.2/quickstart/Howto:-CC3D-flight-controller-minimOSD-telemetry-and-GPS-for-fixed-wing.md

@@ -69,7 +69,7 @@ It is done using Ports tab ![Ports tab](http://s8.hostingkartinok.com/uploads/im
 On the Configuration tab in the Mixer group select the Airplane or Flying Wing depending on the airframe you are using.
 ![Airplane](http://s8.hostingkartinok.com/uploads/images/2017/02/cbcafe5219dcc85798b0cf2e2a86fcde.png)
 Do not pay attention on the servo numbering! It will be described later.
-Now you need to make the accelerometer calibration. It is mandatory to fulfill it and it is better to do it before installing the FC into airframe. Please follow the [instructions](../quickstart/Calibration-Tab.md) to perform the 6 point accelerometer calibration.
+Now you need to make the accelerometer calibration. It is mandatory to fulfill it and it is better to do it before installing the FC into airframe. Please follow the [instructions](./Calibration-Tab.md) to perform the 6 point accelerometer calibration.
 
 ### Flight controller orientation.
 After the calibration is done you may select the sutable board orientation